Impact PowerSync16 Transmitter

The Impact PowerSync16 Transmitter is one-half of the PowerSync16 radio slave system for triggering flash units up to 590' (180 m) away indoors, or 200' (60 m) outdoors using the AC receiver or the DC receiver (both available separately).

PowerSync16 has 16 digitally coded channels available so you can even work at events with other photographers without flash or radio interference. You can trigger as many flashes or cameras as you like from this one transmitter, as long as they're all on the same frequency and have a PowerSync16 receiver. Flash sync speeds of up to 1/250 second are possible with PowerSync16.

The transmitter features a hot shoe mount and can be triggered directly from the camera. In addition, a PC sync cord is included, which allows the transmitter to be positioned off-camera to be triggered via the camera's PC socket. The transmitter operates on one 3V CR2450 battery.

The PowerSync system is not designed to perform in TTL mode with flash units - camera and flash must be set to Manual Mode.

16 Reliable Channels

Digitally coded at 2.4 GHz for multiple set-ups; work at events with other photographers without the worry of flash or radio interference.

Extensive Range of Reliable Performance

590' (180 m) indoors; 200'+ (60+ m) outdoors. An above-average range for the most demanding situations (radio interference and low battery strength will lower your effective range).

Fast Sync Speeds

Compatible with most cameras, offering a maximum sync speed of 1/250 second; allows the user to capture most studio and event scenes.

What's Included:

• PC Male to 1/8"" (2.5mm) Mini Sync Cord
• CR2450 Battery
• 1-Year Limited Warranty