Cart:

0 item(s)$0.00

Order By Phone (866) 672-2102

Oben AC-1461 4-Section Aluminum Tripod with BA-117 Ball Head

Manufacturers Part #:

AC1461BA117

Quick Overview

  • 17.6 lb Load Capacity
  • Maximum Height of 69"
  • Folds Down to 23.8"
  • Individual Leg Spreading
  • Anodized Aluminum Construction
  • Weighs 4.35 lb
  • 5 Bubble Levels

Free Expedited Shipping

Availability: Out of stock

More Views

Details

The Oben AC-1461 4-Section Aluminum Tripod with BA-117 Ball Head provides reliable support for DSLRs, point-and-shoot cameras or video cameras up to 17.6 lb.

The tripod's four-section legs are fabricated from high tensile strength aluminum. It rises to a maximum height of 69" with the center column fully extended and folds down to 23.8" for transport. Flip locks on the legs facilitate rapid setup and break down. Three leg angles: normal (80°), low (55°) and extra low (24°) are available via angle adjustment tabs at the joint of each leg. You can reverse the column with a twist of the butterfly knob or split it in two and use the short column for macro and low angle shooting as low as 9.3" from the ground. Any combination of leg angles can be combined to accommodate uneven terrain, stairs or obstructions. A built-in bubble level helps you square up your compositions. For extra stability the center column employs a spring-loaded counterbalance hook.

The included BA-117 ball head features a single-action knob that controls its rotation and 360 degree panning while a robust ball-locking mechanism secures it solidly. The head's four bubble levels ensure accurate panoramas. The BA-117's built-in quick release comes with a camera plate that features a standard 1/4"-20 screw and a retractable, removable video pin to provide additional stability for camcorders. Since the head is removable, locking screws underneath the collar thwart torsion when re-attaching. The tripod comes with a carry case and shoulder strap for storage and transport.

  • A spring-loaded counterweight hook is located at the bottom of the center column. The column can be separated into 2 parts to give you a short column for low angle and macro work
  • Leg cushions on 2 legs provide a firm grip in cold or wet weather
  • Two included Allen keys attach to a tripod leg, so you're always ready to tighten components
  • Padded carry bag provides a snug fit for the tripod/head combination and features two heavy-duty zippers, an interior pocket with a zipper, and a shoulder strap
  • Angle adjustment locks keep legs at the chosen angles
  • Center column is grooved to prevent rotation
  • Angled rubber feet for maximum contact with the ground
  • Tripod features reversible 1/4""-20 and 3/8""-16 screw to fit almost any head

What's Included:

  • RP-20 Quick Release Plate
  • Shoulder Strap for Case
  • Leg Tool Clip with 2 Allen Keys
  • Allen Key for Split Column
  • Limited 5-Year Warranty

Specifications
General
MaterialAluminum
Load Capacity17.6 lb (8.0 kg)
Maximum Height69"" (175.3 cm)
Maximum Height w/o Column Extended56.8"" (144.3 cm)
Minimum Height9.3"" (23.6 cm)
Folded Length23.8"" (60.5 cm)
Head Attachment Fitting1/4""-20 and 3/8""-16 via reversible screw
Weight4.35 lb (1.97 kg) including ball head
Legs
Leg Stages/Sections4
Leg Lock TypeFlip-lock
Independent Leg SpreadYes
Spiked/Retractable FeetNo
Center BraceNo
Leg Tube DiametersMaximum: 1.1"" (28 mm)
Center Column
Center Column TypeRapid: grooved, reversible, non-rotating, Separates in two to allow use of short center column
Center Column Sections12
Bubble Level5 (1 on chassis, 4 on head)
Head
Head TypeSingle-lever ball head
Quick ReleaseYes, with 1/4""-20 screw & retractable video pin
Load Capacity17.6 lb (8.0 kg)
DimensionsBall diameter: 1.5"" (38 mm), Height: 3.6"" (9.1 cm), Base diameter: 2.0"" (5.0 cm)
Weight0.9 lb (0.4 kg)

Manufacturer Unknown

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: Oben AC-1461 4-Section Aluminum Tripod with BA-117 Ball Head

How do you rate this product? *