Oben ACM-1400 4-Section Aluminum Monopod with Tilt Head Kit

The Oben ACM-1400 4-Section Aluminum Monopod with Swivel/Tilt Head Kit is a iStockOnline Photo Kit which includes the ACM-1400 4-Section Aluminum Monopod and the VH-R2 Swivel/Tilt Monopod Head.

The Oben ACM-1400 4-Section Aluminum Monopod is a lightweight, sturdy one-legged camera support that enables you to capture steady shots without needing to carry or set up a full tripod. The monopod's flip-lock leg stages descend easily and lock into place securely, so setup is a breeze.

The Oben VH-R2 Swivel/Tilt Monopod Head is a compact head specifically designed for monopods. The swivel/tilt head has 180° one-axis movement, allowing you to position your camera for a 90° vertical format when using a monopod. Included is a 1/4-20"-3/8" reducer bushing, which makes this head compatible with either 1/4"-20 or 3/8" mounting threads.

This Kit Includes:

Oben ACM-1400 4-Section Aluminum Monopod

The Oben ACM-1400 4-Section Aluminum Monopod is a lightweight, sturdy one-legged camera support that enables you to capture steady shots without needing to carry or set up a full tripod. The monopod's flip-lock leg stages descend easily and lock into place securely, so setup is a breeze. Maximum height is 61", which facilitates comfortable operation for most users. It can support up to 17.6 lb, so you can mount any DSLR camera with most lenses, a point & shoot model, or even a compact camcorder.

For fine control over camera orientation, you can also attach a head to the monopod's reversible 3/8"-16 & 1/4"-20 mounting screw. Three set screws underneath the collar enable you to fasten the head securely to the plate. An Allen key is included & attached to the top leg section, so you're always ready to make adjustments.

The monopod collapses to just 19.2", so you can stow it in most carry-on bags. At only 1.05 lb, it's the perfect travel companion – lightweight, compact, and simple to operate – but highly capable and ready in an instant to help you capture the perfect shot.

Reversible 1/4"-20 & 3/8"-16 screw for mounting any camera or head
Foam grip mitigates the effects of extreme temperatures and protects your camera by ensuring that your grip doesn't slip
For a second line of security and more stable shooting, wrap the attached strap snugly around your wrist
Wrist strap features belt clip for convenient hands-free carrying

Oben VH-R2 Tilt Head for Monopods

The Oben VH-R2 Tilt Head for Monopods is a compact head specifically designed for monopods. The head has 180° one-axis movement, allowing you to position your camera for a 90° vertical format when using a monopod. Included is a 1/4-20"-3/8" reducer bushing, which makes this head compatible with either 1/4"-20 or 3/8" mounting threads.

A locking knob on the head provides smooth, accurate, and quick operation to rotate the head 180° for horizontal or vertical shooting.
Has a locking pin to prevent accidental camera release.
A snap-in RP-20 Quick-Release Plate for rapid mounting and dismounting of the camera is included.
A 3/8"-1/4" reducer bushing is included to ensure a proper fit for your monopod.