Details
The FreeWave Fusion Wireless Flash Trigger & Remote Control from Vello is a versatile, reliable remote control kit that will trigger off-camera flash units and studio lights from up to 300 feet away. It can be used to configure up to three different light groups, which can be triggered individually or simultaneously, for a total of seven different combinations, using its multiple groups feature. Simultaneous triggering of multiple light groups requires additional FreeWave Fusion Receivers (available separately).
The FreeWave Fusion also provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos or long exposures, where the slightest camera movement can ruin a picture. Working on the 2.4GHz frequency gives you reduced radio interference and an extended range (up to 320' (100 m)) - you don't need to have line-of-sight alignment, either, as radio waves will pass through walls, windows and floors.
- 2.4GHz Radio Frequency
- Reduced interference and improved wireless signal quality.
- Extended Range
- Range up to 320' (100 m)
- Multi-Purpose
- Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger.
- Multiple Groups
- Configure up to three different light groups and up to seven different group combinations.
- Flash Sync Speed of Up to 1/320s
- Take advantage of sync speeds that match the rating of your camera all the way up to 1/320s (on compatible cameras only).
- Flash Wake-Up
- Simply depress the trigger button on the transmitter half-way to pull the flash out of ""sleep-mode"". Sleep mode allows the flash to power down in between shooting sessions to extend battery life. The wake-up function is only available when used as part of a complete Canon TTL system.
Note! If your flash does not have a wake-up function, you may be able to turn off sleep mode. Refer to your flash's manual for instructions. - Versatile
- One receiver works with multiple camera and light models. Just swap out the connecting cables.
- Dual-Function Shutter Release Button
- Press halfway to focus; press fully to trigger shutter.
- LED Indicators
- Confirm pre-focus, shutter release, flash wake-up, and flash trigger in wireless mode.
- Included Shutter Release Cables Support:
- Canon EOS: Elan series, Digital Rebel (300D), XT (350D), XTi (400D), XSi (450D), T1i (500D), T2i (550D), T3 (1100D), T3i (600D), T4i (650D), T5i (700D), SL1 (100D) and XS (1000D), 10D, 20D, 30D, 40D, 50D, 60D, 70D, 5D, 5D Mark II, 7D, 1D, 1Ds, 1DS Mark II, 1Ds Mark III, 1Ds Mark IV; PowerShot G10, G11, G12, G15, G16 & G1 X
Contax: N and 645
Fujifilm: X-E1, X-E2; X-100 (original version)
Hasselblad: H series
Pentax: K100D, K110D, K200D, K-5, K-7, K10D, K20D, K30, *istDS, DS2, DS, DL2, DL, and D
Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10 & GX-20
Sigma: SD1, SD9, SD10, SD14 & SD15 - Optional shutter release cables are available to make the remote control function compatible with other brand camera models
What's Included:
- Wireless Transmitter
- FreeWave Fusion Receiver Only (For Canon)
- FreeWave Camera Release Cable for Select Canon/Fuji/Pentax/Samsung Cameras
- FreeWave Camera Release Cable for Canon Cameras with 3-Pin Connection
- Studio Trigger Cable (2.5mm Sub-Mini to 3.5mm Mini)
- Studio Trigger Adapter (3.5mm Mini to 1/4"" Phono)
- 2 x AAA Batteries
- CR2032 3v Lithium Battery
- 1-Year Limited Warranty
Specifications | N/A |
---|---|
Manufacturer | Vello |